Windows from Poland – timber, aluminium and PVC made to measure

What do windows from Poland cost?

The price depends on the material (timber, alu-clad, aluminium or PVC), the dimensions, the glazing package and extras such as shutters or motor drives. That is why we price each project individually – free of charge and with no obligation. Send us the window schedule from your drawings or book an on-site survey. You will get a binding quote at a fixed price, with no later additions.

Against comparable local quotes the difference is usually between 25 and 40 percent – with identical profiles, hardware and glazing.

Timber, aluminium or PVC? The comparison

Each material has its own strengths. The overview helps you make a first assessment of what suits your budget, your architecture and your insulation requirements.

If you want the natural feel indoors without the maintenance outdoors, alu-clad timber is the option that suits most houses. For large glazed openings, a modern look and higher load capacity, aluminium is the right choice. Where a low price combined with very good insulation matters most, PVC is the sensible alternative.

Not sure? We will go through it with you at the survey – based on your actual project.

PVC windows – Oknoplast on Veka and Rehau

Oknoplast is Poland’s largest window manufacturer and has been in production since 1994. The profiles come from Veka and Rehau – two German system suppliers found in most of what is sold across the European market. You are not buying no-name products, but known systems at Polish production costs. und Rehau – beides deutsche Systemgeber, deren Namen Sie aus jedem deutschen Fensterangebot kennen. Sie kaufen keine No-Name-Ware, sondern bekannte Systeme zu polnischen Produktionskosten.

• Winergetic Premium: passivhaustauglich – die Variante Passiv erreicht mit vier Scheiben U_w = 0,59 W/(m²K).
• Pava: more daylight for the same structural opening, reinforced construction.
• Koncept EVO and Prismatic: slim sightlines for a modern, understated look.
• Pilar: entry-level model, energy class A, U_w = 0,73 W/(m²K).

All ranges in white, anthracite, timber finishes and RAL-sprayed – with different colours inside and out if you want. Security features include reinforced hardware and anti-lever locking, with safety glazing where required.

Aluminium windows – Aluhaus on Aluprof and Aliplast

When the glazed area gets large, timber and PVC reach their limits. Aluminium carries more weight in slimmer frames: more glass, less profile. The systems are thermally broken, with an insulating zone in the profile – so no compromise on thermal performance. We supply the Aluhaus brand, an aluminium specialist within Oknoplast Group.

• MIRU EVO Standard, 87 mm depth: U_w = 0,81 W/(m²K).
• MIRU EVO Standard, 90 mm depth: U_w = 0,70 W/(m²K).
• MIRU EVO Steel, 105 mm depth: U_w = 0,82 W/(m²K) – schmale, stahlähnliche Ansichten für Loft-Optik.
• Corner window without mullion: Glas an Glas mit gestuftem Randverbund – freier Ausblick über Eck.

Typical for lift-and-slide doors, floor-to-ceiling units and mullion-transom constructions. Available in RAL colours and timber finishes. Aluhaus also makes matching external doors if you want a consistent look.

Holz-Aluminium-Fenster – Fakro Innoview

Timber inside, aluminium outside: the interior stays warm and domestic, while the aluminium shell protects the profile from sun and rain and cuts external maintenance considerably. It costs more than PVC but lasts very well – particularly worthwhile on exposed elevations and near the coast.

Timber windows – pine, oak and meranti

For period properties and elevations where PVC is not an option. Pine is the most accessible option on price with very good insulation values, oak the hard and representative choice for higher-end projects, meranti a hardwood with high moisture resistance and pronounced grain..

We use laminated timber – it resists movement and allows substantial profiles that carry heavy, energy-efficient glazing units. That makes large panoramic openings possible, as well as special shapes: arches, trapeziums and units made to your drawing. For listed buildings we make windows in period detailing that meet conservation requirements while still reaching modern thermal values.

Lift-and-slide doors HST, PSK and Smart Slide

Large glazed openings with a low threshold – level access, no trip edge onto the terrace.

• HST: lift-and-slide door for very large and heavy units. In aluminium as HST Slide Slim with a mullion only 42 mm wide, U_d = 0,96 W/(m²K).
• PSK: parallel slide-and-tilt, space-saving and tiltable for ventilation.
• Smart Slide: the slimmer option for mid-size formats.

Available in alu-clad timber, aluminium and PVC. We set the units with vacuum lifters and a crane – heavy glass is not lifted by hand.

Fitting decides what performance you actually get

A window with a good U-value only delivers that value when it is fitted correctly. Get the junction wrong and you create cold bridges – and with them condensation and mould in the reveal. This is exactly where we differ from suppliers who leave a pallet outside your door and leave the fitting to you.

We fit in three layers, on the principle of sealed on the inside, open on the outside. Our teams are certified to ift Rosenheim, the German institute the industry measures fitting quality against – the only company in West Pomerania holding it. in drei Ebenen, nach den Standards des ift Rosenheim – als einziger Betrieb in der Woiwodschaft Westpommern mit dieser Zertifizierung.

• Vapour-tight membrane inside, vapour-open membrane outside.
• Foam used as insulation only, never as a load-bearing element.
• Mechanical fixing sized to the weight of the unit.
• In-house fitting teams with manufacturer certification – no subcontractors.

How it works

• Enquiry – Sie schicken Maße, Fotos oder Pläne. Beratung auf Deutsch.
• On-site survey – kostenlos und unverbindlich, wir kommen zu Ihnen.
• Quote – Festpreis, keine Nachträge.
• Manufacture – nach Maß, 3 bis 5 Wochen ab Auftragsbestätigung.
• Fitting – RAL-Einbau durch unser eigenes Team.
• Aftercare – Garantieabwicklung und Einstellung über uns, nicht über eine Hotline im Ausland.

Common questions about windows from Poland